DCEBData Center Equipment Buyer954-740-1983
Raleigh, NC · 50 – 2000 ton capacity

Chillers Buyers in Raleigh, NC

Air-cooled and water-cooled chillers, cooling towers, CRAC and CRAH units, pumps and dry coolers — the whole mechanical plant.

ScopeWe decommission
and load
PaymentBefore the truck
leaves
CoverageAll 50 states
and DC
Chillers in Raleigh, NC
chillers purchased and removed from Raleigh facilities.
01

Chillers buyers in Raleigh

Chillers coming out of a Raleigh facility is worth quoting even when it is old. Condition, generation and documentation move the number more than age alone, and we will tell you honestly whether your units resell into service or price closer to component and material recovery.

Our North Carolina routing is built around I-85, I-40, I-77 and I-95, which keeps trailer and crew cost predictable for Raleigh projects. Utility territory matters too — Duke Energy Carolinas, Duke Energy Progress, Dominion each have their own switching and disconnect expectations, and we have worked inside them. Charlotte's banking data centers and Research Triangle enterprise and university computing produce a steady stream of audit-documented retirements.

02

What we buy: Chillers

Mechanical plant

Air-cooled screw and scroll chillers, water-cooled centrifugal machines from 50 to 2000 tons, magnetic bearing units, modular chiller banks, cooling towers, dry coolers, plate and frame heat exchangers, primary and secondary pumps, and the VFDs that run them.

White space cooling

Perimeter CRAC and CRAH units, in-row coolers, rear-door heat exchangers and containment hardware. Newer variable-speed in-row units hold strong resale value. Older downflow units with R-22 circuits are refrigerant recovery and metal, and we handle them as such rather than pretending otherwise.

Refrigerant and glycol

Certified recovery of refrigerant before any line is cut, glycol drain-down and disposal, and cap-off of chilled water piping at the points you specify. You receive the recovery documentation. Roof penetrations get patched, curbs left sound.

03

How a project runs

The sequence for a Raleigh project is short. You send an asset list or a few photos. We come back the same business day with a written, itemized offer and a proposed removal window. If you accept, we survey access — dock, freight elevator, door widths, floor loading, whether the room is still live — then mobilize, de-energize, rack out, rig, load and sweep. You get payment before the trailer leaves and settlement documentation after.

04

How the offer is built

In some cases the equipment value exceeds our removal cost and you receive a payment; in others, on older or heavily stripped rooms, the removal cost exceeds the value and the project nets toward zero or a modest fee. We tell you which one you are looking at up front for your Raleigh site rather than discovering it halfway through demolition.

05

What you are actually buying from us

01

We do the decommissioning

Our crews rack out the hardware, de-energize and pull the electrical distribution, recover refrigerant, drain glycol, cut and cap piping, and break down containment and cabinets. You are not hiring a broker who then hires a rigger who then hires a hauler. One company, one point of contact, one insurance certificate.

02

We do the loading

Rigging, lift and crane work, dock plates, pallets, stretch wrap, load bars, straps and the trucks themselves are ours. Overhead busway comes down on lifts. Generators and chillers go out on cranes. Servers leave palletized and manifested. Nothing about the load-out becomes your problem.

03

Payment before the truck leaves

You are paid in full before equipment leaves your dock — wire, company check or cashier's check, your choice. No consignment, no percentage of eventual resale, no invoice you have to chase. The racks stay where they are until the money has landed.

04

Drive destruction, documented

Every data-bearing device is degaussed and physically destroyed, on your floor if you prefer. You receive a certificate of destruction listing serial numbers and a chain-of-custody record signed at each handoff, formatted so your audit team can reconcile it against your asset register.

05

The room is left clean

Floor tiles reset, penetrations patched, abandoned cable removed, debris hauled, and the space swept. Where a landlord or lease requires a specific restoration standard, we work to it and document the result with photographs before and after.

06

Written offers that hold

Quotes are written, itemized by category, and hold for thirty days. If your process needs a formal bid document, a W-9, a certificate of insurance naming your entity, or a purchase order reference on the offer, say so and it is on the paperwork.

06

Other equipment we buy in Raleigh

Three-phase, modular and monolithic

UPS systems — Raleigh

We buy three-phase uninterruptible power supplies out of live and decommissioned white space: modular frames, monolithic units, matching battery cabinets and the static switches that go with them.

10 kVA – 2.5 MVA modules
Floor-mount, RPP and rack PDUs

PDUs — Raleigh

Floor-mount PDUs with integral transformers, remote power panels, and metered or switched rack PDUs by the pallet — we buy all three tiers of distribution.

50 kVA – 1000 kVA floor units
Overhead track, tap boxes, elbows

busway — Raleigh

Overhead busway is the most reusable thing in a white space and the most commonly thrown away. We buy full runs, tap-off boxes, elbows and end feeds.

225 A – 5000 A runs
LV and MV, ATS, breakers

switchgear — Raleigh

Low-voltage lineups, medium-voltage metal-clad gear, automatic transfer switches and loose breakers — bought as complete lineups or section by section.

480 V – 38 kV lineups
Diesel and gas, enclosed or open

generators — Raleigh

Standby diesel and natural gas generator sets, sub-base and belly tanks, paralleling gear and radiator packages — running or not.

100 kW – 3 MW standby sets
Compute, storage, network, GPU

servers — Raleigh

Rackmount compute, storage arrays, network gear and GPU nodes — bought by the rack or by the hall, with documented data destruction.

Single racks – full halls
Everything the equipment sits in

data center infrastructure — Raleigh

Cabinets, containment, cable tray, raised floor, fiber and copper plant — the structure everything else was mounted in.

Cabinets, tray, containment, floor
07

Frequently asked questions

Do you buy chillers in Raleigh that is still installed?
Yes, and that is the normal case. Our Raleigh crews de-energize, disconnect, rig and load. You do not need to have anything removed before we arrive.
What do you need to quote chillers in Raleigh?
Make, model, quantity and 50 – 2000 ton capacity where applicable. Nameplate photographs are the fastest route to a firm number.
Which brands do you buy?
All of them. Most common: Trane, Carrier, York, Daikin McQuay, Vertiv/Liebert, Stulz, Multistack.
How soon can you be in Raleigh?
Written offers the same business day. Site visits in Raleigh usually within a few business days, sooner when a crew is already working through Charlotte, Raleigh, Durham and Greensboro.
When do we get paid?
Before the equipment leaves your dock.

Selling chillers in Raleigh?

Send nameplate photos for a same-day written offer.

Request a Written Offer

Send the asset list, or just tell us roughly what is in the room. We come back the same business day with a written, itemized offer.

Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET