Edgewood, NM Data Center Equipment Buyers
A data hall retirement in Edgewood usually involves three trades: an electrician to de-energize and disconnect, a rigger to move heavy power and cooling equipment, and a hauler to get it off site.
and load
leaves
and DC
Data center equipment buyers in Edgewood
A data hall retirement in Edgewood usually involves three trades: an electrician to de-energize and disconnect, a rigger to move heavy power and cooling equipment, and a hauler to get it off site. Coordinating three vendors around one shutdown window is where these projects go sideways. We collapse all three into one contract and pay you for the equipment on top of it.
What New Mexico conditions mean for your number
Our New Mexico routing is built around I-25, I-40 and I-10, which keeps trailer and crew cost predictable for Edgewood projects. Utility territory matters too — PNM, El Paso Electric, Xcel Energy each have their own switching and disconnect expectations, and we have worked inside them. National laboratory computing at Sandia and Los Alamos produces high-performance cluster retirements with specific security and property-transfer requirements.
What we buy in Edgewood
UPS Systems
We buy three-phase uninterruptible power supplies out of live and decommissioned white space: modular frames, monolithic units, matching battery cabinets and the static switches that go with them.
10 kVA – 2.5 MVA modulesFloor-mount, RPP and rack PDUsPDUs
Floor-mount PDUs with integral transformers, remote power panels, and metered or switched rack PDUs by the pallet — we buy all three tiers of distribution.
50 kVA – 1000 kVA floor unitsOverhead track, tap boxes, elbowsBusway
Overhead busway is the most reusable thing in a white space and the most commonly thrown away. We buy full runs, tap-off boxes, elbows and end feeds.
225 A – 5000 A runsLV and MV, ATS, breakersSwitchgear
Low-voltage lineups, medium-voltage metal-clad gear, automatic transfer switches and loose breakers — bought as complete lineups or section by section.
480 V – 38 kV lineupsDiesel and gas, enclosed or openGenerators
Standby diesel and natural gas generator sets, sub-base and belly tanks, paralleling gear and radiator packages — running or not.
100 kW – 3 MW standby setsAir-cooled, water-cooled, CRAH/CRACChillers
Air-cooled and water-cooled chillers, cooling towers, CRAC and CRAH units, pumps and dry coolers — the whole mechanical plant.
50 – 2000 ton capacityCompute, storage, network, GPUServers
Rackmount compute, storage arrays, network gear and GPU nodes — bought by the rack or by the hall, with documented data destruction.
Single racks – full hallsEverything the equipment sits inData Center Infrastructure
Cabinets, containment, cable tray, raised floor, fiber and copper plant — the structure everything else was mounted in.
Cabinets, tray, containment, floorHow a project runs
For Edgewood sites we quote two ways when it helps: a single number for the room as it sits, and a line-by-line itemization so you can see what the UPS, the gensets, the chillers and the IT are each contributing. Some teams need the lump sum for approval speed; others need the detail for asset records. You can have both.
How the offer is built
What drives the number is condition, generation and demand, in that order. A modular UPS with its power modules intact is worth substantially more than the same frame stripped. A generator with documented low hours and recent load bank results beats an identical unit with no records. Recent-generation servers hold real value; anything past its useful platform life is priced closer to material. We will tell you which bucket your Edgewood equipment falls into before you commit to anything.
Data security and compliance
Data security is treated as a hard requirement, not a service add-on. Drives in Edgewood can be wiped to NIST 800-88 purge standards, degaussed, or physically shredded, on site if your policy requires it. Every serial number is captured and reported. Chain of custody is documented from the rack to the truck to the destruction record.
What you are actually buying from us
We do the decommissioning
Our crews rack out the hardware, de-energize and pull the electrical distribution, recover refrigerant, drain glycol, cut and cap piping, and break down containment and cabinets. You are not hiring a broker who then hires a rigger who then hires a hauler. One company, one point of contact, one insurance certificate.
We do the loading
Rigging, lift and crane work, dock plates, pallets, stretch wrap, load bars, straps and the trucks themselves are ours. Overhead busway comes down on lifts. Generators and chillers go out on cranes. Servers leave palletized and manifested. Nothing about the load-out becomes your problem.
Payment before the truck leaves
You are paid in full before equipment leaves your dock — wire, company check or cashier's check, your choice. No consignment, no percentage of eventual resale, no invoice you have to chase. The racks stay where they are until the money has landed.
Drive destruction, documented
Every data-bearing device is degaussed and physically destroyed, on your floor if you prefer. You receive a certificate of destruction listing serial numbers and a chain-of-custody record signed at each handoff, formatted so your audit team can reconcile it against your asset register.
The room is left clean
Floor tiles reset, penetrations patched, abandoned cable removed, debris hauled, and the space swept. Where a landlord or lease requires a specific restoration standard, we work to it and document the result with photographs before and after.
Written offers that hold
Quotes are written, itemized by category, and hold for thirty days. If your process needs a formal bid document, a W-9, a certificate of insurance naming your entity, or a purchase order reference on the offer, say so and it is on the paperwork.
Electrical equipment we also buy in Edgewood
Transformers, switchgear and general electrical apparatus are bought under dedicated programs, on the same terms:
Nearby New Mexico coverage
Other New Mexico locations we buy data center equipment in:
Frequently asked questions
Do you handle the decommissioning, or do we have to shut it down first?
How do you handle drives and data in Edgewood?
When do we get paid?
What if the equipment is older or has no maintenance records?
Are you insured for work inside our Edgewood facility?
Can you work nights and weekends in Edgewood?
Selling data center equipment in Edgewood?
Send the asset list. Written, itemized offer the same business day.
Send the asset list, or just tell us roughly what is in the room. We come back the same business day with a written, itemized offer.
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET