DCEBData Center Equipment Buyer954-740-1983
On-site crews · MS

Data Center Decommissioning and Equipment Purchase in Latimer, MS

Whether it is one 500 kVA UPS in a Latimer basement or a full hall of cabinets, busway, switchgear and chillers, we will buy it as it sits.

ScopeWe decommission
and load
PaymentBefore the truck
leaves
CoverageAll 50 states
and DC
Data center decommissioning in Latimer, MS
Rooms bought complete in Latimer and across Mississippi.
01

Data center equipment buyers in Latimer

Whether it is one 500 kVA UPS in a Latimer basement or a full hall of cabinets, busway, switchgear and chillers, we will buy it as it sits. We quote from an asset list, a maintenance report or a walkthrough, and we come back the same business day with an itemized written offer you can forward straight to finance.

02

What Mississippi conditions mean for your number

We treat Mississippi as one service area rather than a list of cities. Crews moving between Jackson, Gulfport and Hattiesburg pass through Latimer regularly, which is why a single UPS or a couple of cabinets is still worth quoting here — we can add it to an existing run instead of pricing a dedicated trip.

03

What we buy in Latimer

Three-phase, modular and monolithic

UPS Systems

We buy three-phase uninterruptible power supplies out of live and decommissioned white space: modular frames, monolithic units, matching battery cabinets and the static switches that go with them.

10 kVA – 2.5 MVA modules
Floor-mount, RPP and rack PDUs

PDUs

Floor-mount PDUs with integral transformers, remote power panels, and metered or switched rack PDUs by the pallet — we buy all three tiers of distribution.

50 kVA – 1000 kVA floor units
Overhead track, tap boxes, elbows

Busway

Overhead busway is the most reusable thing in a white space and the most commonly thrown away. We buy full runs, tap-off boxes, elbows and end feeds.

225 A – 5000 A runs
LV and MV, ATS, breakers

Switchgear

Low-voltage lineups, medium-voltage metal-clad gear, automatic transfer switches and loose breakers — bought as complete lineups or section by section.

480 V – 38 kV lineups
Diesel and gas, enclosed or open

Generators

Standby diesel and natural gas generator sets, sub-base and belly tanks, paralleling gear and radiator packages — running or not.

100 kW – 3 MW standby sets
Air-cooled, water-cooled, CRAH/CRAC

Chillers

Air-cooled and water-cooled chillers, cooling towers, CRAC and CRAH units, pumps and dry coolers — the whole mechanical plant.

50 – 2000 ton capacity
Compute, storage, network, GPU

Servers

Rackmount compute, storage arrays, network gear and GPU nodes — bought by the rack or by the hall, with documented data destruction.

Single racks – full halls
Everything the equipment sits in

Data Center Infrastructure

Cabinets, containment, cable tray, raised floor, fiber and copper plant — the structure everything else was mounted in.

Cabinets, tray, containment, floor
04

How a project runs

If the Latimer room is still carrying load, we phase it. Typically that means IT and racks first, then distribution, then the power and cooling plant once the last circuit is dead. We write the phasing into the offer so nobody is improvising in the hall at 2am.

05

How the offer is built

We do not lowball and then renegotiate on the dock, which is the most common complaint we hear about this industry. If the asset list you send matches what our crew finds in Latimer, the written price is the price we pay. If it does not match — batteries missing, a unit already cannibalized, different model numbers — we show you exactly which line changed and why.

06

Data security and compliance

If your Latimer facility handles regulated data — patient records under HIPAA, cardholder data under PCI, student records under FERPA, or federal workloads — tell us at the quote stage. We adjust the scope so drive handling, escorting and reporting satisfy your auditor rather than retrofitting compliance after the fact.

07

What you are actually buying from us

01

We do the decommissioning

Our crews rack out the hardware, de-energize and pull the electrical distribution, recover refrigerant, drain glycol, cut and cap piping, and break down containment and cabinets. You are not hiring a broker who then hires a rigger who then hires a hauler. One company, one point of contact, one insurance certificate.

02

We do the loading

Rigging, lift and crane work, dock plates, pallets, stretch wrap, load bars, straps and the trucks themselves are ours. Overhead busway comes down on lifts. Generators and chillers go out on cranes. Servers leave palletized and manifested. Nothing about the load-out becomes your problem.

03

Payment before the truck leaves

You are paid in full before equipment leaves your dock — wire, company check or cashier's check, your choice. No consignment, no percentage of eventual resale, no invoice you have to chase. The racks stay where they are until the money has landed.

04

Drive destruction, documented

Every data-bearing device is degaussed and physically destroyed, on your floor if you prefer. You receive a certificate of destruction listing serial numbers and a chain-of-custody record signed at each handoff, formatted so your audit team can reconcile it against your asset register.

05

The room is left clean

Floor tiles reset, penetrations patched, abandoned cable removed, debris hauled, and the space swept. Where a landlord or lease requires a specific restoration standard, we work to it and document the result with photographs before and after.

06

Written offers that hold

Quotes are written, itemized by category, and hold for thirty days. If your process needs a formal bid document, a W-9, a certificate of insurance naming your entity, or a purchase order reference on the offer, say so and it is on the paperwork.

08

Electrical equipment we also buy in Latimer

Transformers, switchgear and general electrical apparatus are bought under dedicated programs, on the same terms:

09

Nearby Mississippi coverage

We cover the whole Mississippi market, so if your equipment is not in Latimer itself, one of these is probably closer:

All Mississippi cities

10

Frequently asked questions

Can you work nights and weekends in Latimer?
Regularly. Most data center removals happen outside business hours because that is when load can be transferred and freight elevators are free. Night, weekend and holiday windows in Latimer are normal scheduling for us, not a premium service.
What do you do with the equipment after you buy it?
Working assets are tested, refurbished where needed and resold into the secondary market — that resale is what funds your offer. Equipment that cannot be returned to service is dismantled for component and material recovery through permitted downstream processors, with landfill diversion documented.
Do you buy equipment that is still under a service contract?
Yes, and we will coordinate with the OEM or service provider so contract termination and equipment transfer line up. Tell us at the quote stage which Latimer assets have active coverage; occasionally a transferable contract increases what we can pay.
We are on an upper floor with a small freight elevator. Is that a problem?
It is a routine problem. Large UPS frames, transformers and gensets often have to be disassembled to pass elevator weight limits and door widths. Our survey of your Latimer site establishes the rigging path before we commit to a date, and the cost is already inside the offer.
Do you actually buy data center equipment in Latimer, or just broker it?
We buy it. Data Center Equipment Buyer is the purchaser of record — we fund the purchase, we send our own crews to Latimer to decommission and load, and we take title when the equipment leaves your dock. There is no third-party buyer waiting behind us to approve the price.
What is the smallest job you will take in Latimer?
A single UPS, one generator, a few PDUs or a handful of cabinets is worth a call. Because we route crews across Mississippi continuously, small Latimer pickups can usually be added to an existing run rather than priced as a dedicated trip.

Selling data center equipment in Latimer?

Send the asset list. Written, itemized offer the same business day.

Request a Written Offer

Send the asset list, or just tell us roughly what is in the room. We come back the same business day with a written, itemized offer.

Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET