DCEBData Center Equipment Buyer954-740-1983
National · 75 kVA – 10 MVA, pad-mount, dry-type, substation

Electrical Transformer Buyers

A direct buyer of electrical transformers nationwide — pad-mount, dry-type, cast coil, unit substation and isolation units, from 75 kVA through 10 MVA. We de-energize, disconnect, rig, load and pay before the truck leaves your site.

ScopeWe decommission
and load
PaymentBefore the truck
leaves
CoverageAll 50 states
and DC
Electrical Transformer Buyers — equipment being assessed for purchase
Surveyed, de-energized, rigged and hauled by our own crews.
01

What we buy

Pad-mount and unit substation

Oil-filled pad-mount transformers and unit substations from 75 kVA through 10 MVA, loop-feed or radial, with or without their primary switching. These are the units sitting on a pad outside the building or in a vault feeding the service entrance. We test for PCB content, handle oil containment during the move, and provide the manifests that go with it.

Dry-type and cast coil

Ventilated dry-type and cast-coil transformers from 15 kVA through 3 MVA, including the 480V-to-208V step-down units feeding PDUs and the K-rated units specified for harmonic loads. Dry-types move easily and resell quickly, so they usually carry a strong number relative to their weight.

Isolation, K-rated and specialty

Isolation transformers built into PDUs and RPPs, K-4 through K-20 rated units, drive isolation transformers, harmonic mitigating transformers and three-phase autotransformers. If it is copper or aluminum wound and it stepped voltage in your facility, it is in scope.

02

Manufacturers we see most

We buy all major manufacturers, and brand matters mainly because it determines who else wants the equipment. Common names move fastest: Square D, Eaton/Cutler-Hammer, GE/ABB, Siemens, Hammond, Federal Pacific, Acme, Jefferson, Howard, Olsun. Unusual brands are still purchased; they simply price against a thinner buyer pool.

03

How the number is built

Transformer value is driven by kVA, winding material, voltage class and condition, and copper-wound units are worth meaningfully more than aluminum. Nameplate photos are the single most useful thing you can send us — they resolve kVA, primary and secondary voltage, impedance and winding material in one shot.

Removal cost is stated inside the offer rather than hidden in the price. You see what the equipment is worth and what the work costs, which is the only way to compare us honestly against a quote that excludes removal.

04

What you are actually buying from us

01

We do the decommissioning

Our crews rack out the hardware, de-energize and pull the electrical distribution, recover refrigerant, drain glycol, cut and cap piping, and break down containment and cabinets. You are not hiring a broker who then hires a rigger who then hires a hauler. One company, one point of contact, one insurance certificate.

02

We do the loading

Rigging, lift and crane work, dock plates, pallets, stretch wrap, load bars, straps and the trucks themselves are ours. Overhead busway comes down on lifts. Generators and chillers go out on cranes. Servers leave palletized and manifested. Nothing about the load-out becomes your problem.

03

Payment before the truck leaves

You are paid in full before equipment leaves your dock — wire, company check or cashier's check, your choice. No consignment, no percentage of eventual resale, no invoice you have to chase. The racks stay where they are until the money has landed.

04

Drive destruction, documented

Every data-bearing device is degaussed and physically destroyed, on your floor if you prefer. You receive a certificate of destruction listing serial numbers and a chain-of-custody record signed at each handoff, formatted so your audit team can reconcile it against your asset register.

05

The room is left clean

Floor tiles reset, penetrations patched, abandoned cable removed, debris hauled, and the space swept. Where a landlord or lease requires a specific restoration standard, we work to it and document the result with photographs before and after.

06

Written offers that hold

Quotes are written, itemized by category, and hold for thirty days. If your process needs a formal bid document, a W-9, a certificate of insurance naming your entity, or a purchase order reference on the offer, say so and it is on the paperwork.

05

Also in the room

Electrical equipment rarely leaves alone. Where a data hall or plant is coming down, we buy the IT, cooling and infrastructure with it:

06

Electrical Transformer Buyers by metro

07

Statewide coverage

Browse all cities

08

Frequently asked questions

What transformer sizes do you buy?
From small 15 kVA dry-types up through 10 MVA substation units. There is no upper limit that matters in practice; large units simply need a rigging plan and sometimes a crane, both of which we price into the offer.
Do you test for PCBs?
Yes, on oil-filled units where the nameplate does not already certify non-PCB. Testing protects both of us: PCB-contaminated oil changes disposal requirements and cost, and we would rather know before the unit is on a trailer than after.
Is a copper-wound transformer worth more than aluminum?
Substantially, yes. Copper windings carry both higher resale demand and higher material value. The nameplate usually states winding material; if it does not, our technicians can determine it on the survey.
Can you disconnect and remove the transformer yourselves?
That is the normal scope. We coordinate the outage with your electrician or the utility, de-energize, disconnect primary and secondary, remove grounding, rig the unit out, contain any oil, and haul it. You are buying one contract, not three.
What about transformers still in service?
We buy those constantly — most transformer purchases are tied to a replacement or a facility shutdown. Tell us the planned outage window and we schedule around it, including nights and weekends.

Selling transformers? Send nameplate photos.

Written, itemized offers the same business day. We disconnect, rig, load and pay on the dock.

Request a Written Offer

Send the asset list, or just tell us roughly what is in the room. We come back the same business day with a written, itemized offer.

Faster: call or text 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET